Duplex 2850 Softeners Quality duplex water softeners with tough, cost efficient fiberglass tanks and brass valves Features ABS tanks for longer service life, FRP wrapped for strength and corrosion resistance ANSI / NSF listed tanks twin alternating operation (one in service - one in stand-by) no hard water by-pass during regeneration exchange capacities 90,000 grains to 300,000 grains 1=1/2” lead free brass commercial control valve self cleaning, hydraulically balanced positive acting piston control valves flow rates of 24 gpm up to a peak of 58 gpm solid state demand initiated regeneration timed brine refill of brine tank (eliminates constant line pressure on shut-off float devices) 24 volt operation (wall mount transformer included) Softeners Model 2850 Duplex Alternating System Model 2850 softeners offer a wide range of capabilities: exchange capacities from 90 to 300,000 grains; valve size is 1.5"; and tank diameters of 14 to 24 inches. Softeners use the experience-proven Fleck valve controlled by a standard solid state control or an optional fully programmable electronic control. Softeners are available as duplex models for uninterrupted soft water service. Specifications Volume Initiated Programmable Control The VIP Electronic demand control is micro processor based with self diagnostics. It is easily programmed, displays information about the system operating status, anticipates future operating conditions, and adjusts itself to changes in water usage. The VIP Electronic Demand control provides the water treatment owner/operator with versatility, economy, and reliability of operation.

©AquaMech, LLC 790 Route 537 Cream Ridge, New Jersey 08514 Phone: (609) 758-1110 Fax: (609) 758-1010